dubbo(四):服务路由的实现

上一篇中,我们介绍了dubbo的负载均衡实现,见识了几种常用的负载均衡算法。就单个功能而言,似乎dubbo并没有太多的突出之处。事实上,一个成功的产品不必每个地方都要打破常规。更重要的是其全局优化的架构设计,以及如何使用现有的优秀解决方案为己服务。
本篇将介绍另一种集群环境中的高可用实现:路由服务的实现。它将从另一个角度补充dubbo的集群功能完整性。

1. 路由出现的时机?

服务路由是什么派上用场的呢?实际上,它是在进行消费都调用提供者的第一步操作。集群的几个策略的先后为: 服务路由 -> 负载均衡 -> 集群容错(重试);
其调用入口框架是在 org.apache.dubbo.rpc.cluster.support.FailoverClusterInvoker 中的:

    @Override
    @SuppressWarnings({"unchecked", "rawtypes"})
    public Result doInvoke(Invocation invocation, final List<Invoker> invokers, LoadBalance loadbalance) throws RpcException {
        List<Invoker> copyInvokers = invokers;
        checkInvokers(copyInvokers, invocation);
        String methodName = RpcUtils.getMethodName(invocation);
        int len = getUrl().getMethodParameter(methodName, RETRIES_KEY, DEFAULT_RETRIES) + 1;
        if (len <= 0) {
            len = 1;
        }
        // retry loop.
        RpcException le = null; // last exception.
        List<Invoker> invoked = new ArrayList<Invoker>(copyInvokers.size()); // invoked invokers.
        Set providers = new HashSet(len);
        for (int i = 0; i  0) {
                checkWhetherDestroyed();
                // 服务路由,入口,由父类中调用
                copyInvokers = list(invocation);
                // check again
                checkInvokers(copyInvokers, invocation);
            }
            // 负载均衡入口
            Invoker invoker = select(loadbalance, invocation, copyInvokers, invoked);
            invoked.add(invoker);
            RpcContext.getContext().setInvokers((List) invoked);
            try {
                Result result = invoker.invoke(invocation);
                if (le != null && logger.isWarnEnabled()) {
                    logger.warn("Although retry the method " + methodName
                            + " in the service " + getInterface().getName()
                            + " was successful by the provider " + invoker.getUrl().getAddress()
                            + ", but there have been failed providers " + providers
                            + " (" + providers.size() + "/" + copyInvokers.size()
                            + ") from the registry " + directory.getUrl().getAddress()
                            + " on the consumer " + NetUtils.getLocalHost()
                            + " using the dubbo version " + Version.getVersion() + ". Last error is: "
                            + le.getMessage(), le);
                }
                return result;
            } catch (RpcException e) {
                if (e.isBiz()) { // biz exception.
                    throw e;
                }
                // 集群容错,进行重试调用
                le = e;
            } catch (Throwable e) {
                le = new RpcException(e.getMessage(), e);
            } finally {
                providers.add(invoker.getUrl().getAddress());
            }
        }
        throw new RpcException(le.getCode(), "Failed to invoke the method "
                + methodName + " in the service " + getInterface().getName()
                + ". Tried " + len + " times of the providers " + providers
                + " (" + providers.size() + "/" + copyInvokers.size()
                + ") from the registry " + directory.getUrl().getAddress()
                + " on the consumer " + NetUtils.getLocalHost() + " using the dubbo version "
                + Version.getVersion() + ". Last error is: "
                + le.getMessage(), le.getCause() != null ? le.getCause() : le);
    }
    // org.apache.dubbo.rpc.cluster.support.AbstractClusterInvoker#list
    protected List<Invoker> list(Invocation invocation) throws RpcException {
        // 直接调用对应的路径服务的 list() 方法进行路由。
        return directory.list(invocation);
    }
    // org.apache.dubbo.rpc.cluster.directory.AbstractDirectory#list
    @Override
    public List<Invoker> list(Invocation invocation) throws RpcException {
        if (destroyed) {
            throw new RpcException("Directory already destroyed .url: " + getUrl());
        }

        return doList(invocation);
    }
    // org.apache.dubbo.registry.integration.RegistryDirectory#doList
    @Override
    public List<Invoker> doList(Invocation invocation) {
        if (forbidden) {
            // 1. No service provider 2. Service providers are disabled
            throw new RpcException(RpcException.FORBIDDEN_EXCEPTION, "No provider available from registry " +
                    getUrl().getAddress() + " for service " + getConsumerUrl().getServiceKey() + " on consumer " +
                    NetUtils.getLocalHost() + " use dubbo version " + Version.getVersion() +
                    ", please check status of providers(disabled, not registered or in blacklist).");
        }

        if (multiGroup) {
            return this.invokers == null ? Collections.emptyList() : this.invokers;
        }

        List<Invoker> invokers = null;
        try {
            // Get invokers from cache, only runtime routers will be executed.
            invokers = routerChain.route(getConsumerUrl(), invocation);
        } catch (Throwable t) {
            logger.error("Failed to execute router: " + getUrl() + ", cause: " + t.getMessage(), t);
        }

        return invokers == null ? Collections.emptyList() : invokers;
    }
    
    // org.apache.dubbo.rpc.cluster.RouterChain#route
    public List<Invoker> route(URL url, Invocation invocation) {
        List<Invoker> finalInvokers = invokers;
        // 根据注册的 routers 依次调用,过滤 finalInvokers 之后返回
        for (Router router : routers) {
            finalInvokers = router.route(finalInvokers, url, invocation);
        }
        return finalInvokers;
    }

2. dubbo提供了哪些路由策略?

Dubbo 目前提供了三种服务路由实现,分别为条件路由 ConditionRouter、脚本路由 ScriptRouter 和标签路由 TagRouter。
router 的创建时机:每次url发生变更后(如后台修改),都会触发一次路由信息重建。

    // org.apache.dubbo.registry.integration.RegistryDirectory#notify
    @Override
    public synchronized void notify(List urls) {
        Map<String, List> categoryUrls = urls.stream()
                .filter(Objects::nonNull)
                .filter(this::isValidCategory)
                .filter(this::isNotCompatibleFor26x)
                .collect(Collectors.groupingBy(this::judgeCategory));

        List configuratorURLs = categoryUrls.getOrDefault(CONFIGURATORS_CATEGORY, Collections.emptyList());
        this.configurators = Configurator.toConfigurators(configuratorURLs).orElse(this.configurators);

        List routerURLs = categoryUrls.getOrDefault(ROUTERS_CATEGORY, Collections.emptyList());
        // 从url中取出相应的路由服务类,添加 routerChain 中,备用
        toRouters(routerURLs).ifPresent(this::addRouters);

        // providers
        List providerURLs = categoryUrls.getOrDefault(PROVIDERS_CATEGORY, Collections.emptyList());
        /**
         * 3.x added for extend URL address
         */
        ExtensionLoader addressListenerExtensionLoader = ExtensionLoader.getExtensionLoader(AddressListener.class);
        List supportedListeners = addressListenerExtensionLoader.getActivateExtension(getUrl(), (String[]) null);
        if (supportedListeners != null && !supportedListeners.isEmpty()) {
            for (AddressListener addressListener : supportedListeners) {
                providerURLs = addressListener.notify(providerURLs, getConsumerUrl(),this);
            }
        }
        refreshOverrideAndInvoker(providerURLs);
    }
    // org.apache.dubbo.registry.integration.RegistryDirectory#toRouters
    /**
     * @param urls
     * @return null : no routers ,do nothing
     * else :routers list
     */
    private Optional<List> toRouters(List urls) {
        if (urls == null || urls.isEmpty()) {
            return Optional.empty();
        }

        List routers = new ArrayList();
        for (URL url : urls) {
            if (EMPTY_PROTOCOL.equals(url.getProtocol())) {
                continue;
            }
            String routerType = url.getParameter(ROUTER_KEY);
            if (routerType != null && routerType.length() > 0) {
                url = url.setProtocol(routerType);
            }
            try {
                // 根据router工厂类进行创建router, 该工厂类使用 SPI 机制进行生成,实现 RouterFactory
                // file=org.apache.dubbo.rpc.cluster.router.file.FileRouterFactory
                // script=org.apache.dubbo.rpc.cluster.router.script.ScriptRouterFactory
                // condition=org.apache.dubbo.rpc.cluster.router.condition.ConditionRouterFactory
                // service=org.apache.dubbo.rpc.cluster.router.condition.config.ServiceRouterFactory
                // app=org.apache.dubbo.rpc.cluster.router.condition.config.AppRouterFactory
                // tag=org.apache.dubbo.rpc.cluster.router.tag.TagRouterFactory
                // mock=org.apache.dubbo.rpc.cluster.router.mock.MockRouterFactory
                Router router = ROUTER_FACTORY.getRouter(url);
                if (!routers.contains(router)) {
                    routers.add(router);
                }
            } catch (Throwable t) {
                logger.error("convert router url to router error, url: " + url, t);
            }
        }

        return Optional.of(routers);
    }

所以,整体上整个router的创建,依赖于url中的router参数,用该参数找到对应的router工厂类,然后调用其 getRouter()方法生成具体的router. 我们简单看看router的工厂类一般是什么样的?

2.1. 路由工厂类的构建

/**
 * Application level router factory
 */
@Activate(order = 200)
public class AppRouterFactory implements RouterFactory {
    public static final String NAME = "app";

    private volatile Router router;

    @Override
    public Router getRouter(URL url) {
        // 一个工厂类中,只有一个单例的router
        if (router != null) {
            return router;
        }
        // 双重锁 懒加载
        synchronized (this) {
            if (router == null) {
                router = createRouter(url);
            }
        }
        return router;
    }

    private Router createRouter(URL url) {
        
        return new AppRouter(url);
    }
}

// 可缓存路由
/**
 * Service level router factory
 */
@Activate(order = 300)
public class ServiceRouterFactory extends CacheableRouterFactory {

    public static final String NAME = "service";

    @Override
    protected Router createRouter(URL url) {
        return new ServiceRouter(url);
    }

}

// 条件路径工厂类
public class ConditionRouterFactory implements RouterFactory {

    public static final String NAME = "condition";

    @Override
    public Router getRouter(URL url) {
        // 直接new对象返回
        return new ConditionRouter(url);
    }

}

// 文件路由工厂类,事实上它并不一个单纯的路由工厂类,它需要依赖于别的路由工厂
public class FileRouterFactory implements RouterFactory {

    public static final String NAME = "file";

    private RouterFactory routerFactory;
    // 将别的路由工厂注入进来
    public void setRouterFactory(RouterFactory routerFactory) {
        this.routerFactory = routerFactory;
    }

    @Override
    public Router getRouter(URL url) {
        try {
            // Transform File URL into Script Route URL, and Load
            // file:///d:/path/to/route.js?router=script ==> script:///d:/path/to/route.js?type=js&rule=
            String protocol = url.getParameter(ROUTER_KEY, ScriptRouterFactory.NAME); // Replace original protocol (maybe 'file') with 'script'
            String type = null; // Use file suffix to config script type, e.g., js, groovy ...
            String path = url.getPath();
            if (path != null) {
                int i = path.lastIndexOf('.');
                if (i > 0) {
                    type = path.substring(i + 1);
                }
            }
            String rule = IOUtils.read(new FileReader(new File(url.getAbsolutePath())));

            // FIXME: this code looks useless
            boolean runtime = url.getParameter(RUNTIME_KEY, false);
            URL script = URLBuilder.from(url)
                    .setProtocol(protocol)
                    .addParameter(TYPE_KEY, type)
                    .addParameter(RUNTIME_KEY, runtime)
                    .addParameterAndEncoded(RULE_KEY, rule)
                    .build();
            // 将重新组装后的url,传递委托给注入的路由工厂进行处理
            return routerFactory.getRouter(script);
        } catch (IOException e) {
            throw new IllegalStateException(e.getMessage(), e);
        }
    }

}
    
@Activate
public class MockRouterFactory implements RouterFactory {
    public static final String NAME = "mock";

    @Override
    public Router getRouter(URL url) {
        return new MockInvokersSelector();
    }

}
// 脚本路由工厂
/**
 * ScriptRouterFactory
 * 
 * Example URLS used by Script Router Factory:
 * 
    *
  1. script://registryAddress?type=js&rule=xxxx *
  2. script:///path/to/routerfile.js?type=js&rule=xxxx *
  3. script://D:\path\to\routerfile.js?type=js&rule=xxxx *
  4. script://C:/path/to/routerfile.js?type=js&rule=xxxx *
* The host value in URL points out the address of the source content of the Script Router,Registry、File etc * */ public class ScriptRouterFactory implements RouterFactory { public static final String NAME = "script"; @Override public Router getRouter(URL url) { // 直接new对象返回 return new ScriptRouter(url); } } // 标签路由工厂,可缓存路由(使用一个ConcurrentHashMap集合容器进行保存已创建的router) @Activate(order = 100) public class TagRouterFactory extends CacheableRouterFactory { public static final String NAME = "tag"; // getRouter() 由 父类统一进行框架搭建,子类只需实现 createRouter() 即可 @Override protected Router createRouter(URL url) { return new TagRouter(url); } } /** * If you want to provide a router implementation based on design of v2.7.0, please extend from this abstract class. * For 2.6.x style router, please implement and use RouterFactory directly. */ public abstract class CacheableRouterFactory implements RouterFactory { private ConcurrentMap routerMap = new ConcurrentHashMap(); @Override public Router getRouter(URL url) { return routerMap.computeIfAbsent(url.getServiceKey(), k -> createRouter(url)); } protected abstract Router createRouter(URL url); }

可以看出这些个工厂类,基本都是使用new的方法就返回了对应的路由实例类。那么是否有必要都在这些类外面包一个工厂类进行创建呢?直接创建不好吗?事实上,这只是个一种工厂模式的最佳实践,是为了更好的隐藏创建逻辑。

2.2. 条件路由 ConditionRouter 详解

路由功能的实现,主要分为规则解析和规则应用两个部分!

    // 构造方法,主要是解析一些参数
    public ConditionRouter(URL url) {
        this.url = url;
        // priority=1
        this.priority = url.getParameter(PRIORITY_KEY, 0);
        // force=false
        this.force = url.getParameter(FORCE_KEY, false);
        // enabled=true
        this.enabled = url.getParameter(ENABLED_KEY, true);
        // rule=xxx
        // init 方法中详细解析路由规则
        init(url.getParameterAndDecoded(RULE_KEY));
    }
    // 解析条件规则 host = 10.20.153.10 => host = 10.20.153.11
    public void init(String rule) {
        try {
            if (rule == null || rule.trim().length() == 0) {
                throw new IllegalArgumentException("Illegal route rule!");
            }
            // 规则如: host = 10.20.153.10 => host = 10.20.153.11
            rule = rule.replace("consumer.", "").replace("provider.", "");
            int i = rule.indexOf("=>");
            // 如果没有=>, 则全部路由到 该规则指定的host中
            String whenRule = i < 0 ? null : rule.substring(0, i).trim();
            String thenRule = i < 0 ? rule.trim() : rule.substring(i + 2).trim();
            Map when = StringUtils.isBlank(whenRule) || "true".equals(whenRule) ? new HashMap() : parseRule(whenRule);
            Map then = StringUtils.isBlank(thenRule) || "false".equals(thenRule) ? null : parseRule(thenRule);
            // NOTE: It should be determined on the business level whether the `When condition` can be empty or not.
            this.whenCondition = when;
            this.thenCondition = then;
        } catch (ParseException e) {
            throw new IllegalStateException(e.getMessage(), e);
        }
    }
    // 解析条件规则键值对
    private static Map parseRule(String rule)
            throws ParseException {
        Map condition = new HashMap();
        if (StringUtils.isBlank(rule)) {
            return condition;
        }
        // Key-Value pair, stores both match and mismatch conditions
        MatchPair pair = null;
        // Multiple values
        Set values = null;
        // ROUTE_PATTERN = Pattern.compile("([&!=,]*)\\s*([^&!=,\\s]+)");
        final Matcher matcher = ROUTE_PATTERN.matcher(rule);
        while (matcher.find()) { // Try to match one by one
            String separator = matcher.group(1);
            String content = matcher.group(2);
            // Start part of the condition expression.
            if (StringUtils.isEmpty(separator)) {
                pair = new MatchPair();
                condition.put(content, pair);
            }
            // The KV part of the condition expression
            // &host=xxx
            else if ("&".equals(separator)) {
                if (condition.get(content) == null) {
                    pair = new MatchPair();
                    condition.put(content, pair);
                } else {
                    pair = condition.get(content);
                }
            }
            // The Value in the KV part.
            else if ("=".equals(separator)) {
                if (pair == null) {
                    throw new ParseException("Illegal route rule \""
                            + rule + "\", The error char '" + separator
                            + "' at index " + matcher.start() + " before \""
                            + content + "\".", matcher.start());
                }

                values = pair.matches;
                values.add(content);
            }
            // The Value in the KV part.
            else if ("!=".equals(separator)) {
                if (pair == null) {
                    throw new ParseException("Illegal route rule \""
                            + rule + "\", The error char '" + separator
                            + "' at index " + matcher.start() + " before \""
                            + content + "\".", matcher.start());
                }

                values = pair.mismatches;
                values.add(content);
            }
            // The Value in the KV part, if Value have more than one items.
            else if (",".equals(separator)) { // Should be separated by ','
                if (values == null || values.isEmpty()) {
                    throw new ParseException("Illegal route rule \""
                            + rule + "\", The error char '" + separator
                            + "' at index " + matcher.start() + " before \""
                            + content + "\".", matcher.start());
                }
                values.add(content);
            } else {
                throw new ParseException("Illegal route rule \"" + rule
                        + "\", The error char '" + separator + "' at index "
                        + matcher.start() + " before \"" + content + "\".", matcher.start());
            }
        }
        return condition;
    }

2. 接下来是如何使用这些配置好的规则
路由服务由routerChain进行统一调用:

    // org.apache.dubbo.rpc.cluster.RouterChain#route
    /**
     *
     * @param url
     * @param invocation
     * @return
     */
    public List<Invoker> route(URL url, Invocation invocation) {
        List<Invoker> finalInvokers = invokers;
        for (Router router : routers) {
            finalInvokers = router.route(finalInvokers, url, invocation);
        }
        return finalInvokers;
    }
    // 以下是条件路由的route()实现:
    @Override
    public  List<Invoker> route(List<Invoker> invokers, URL url, Invocation invocation)
            throws RpcException {
        if (!enabled) {
            return invokers;
        }

        if (CollectionUtils.isEmpty(invokers)) {
            return invokers;
        }
        try {
            // 如果不符合路由条件,直接返回所有原样 invokers 即可 
            if (!matchWhen(url, invocation)) {
                return invokers;
            }
            List<Invoker> result = new ArrayList<Invoker>();
            if (thenCondition == null) {
                logger.warn("The current consumer in the service blacklist. consumer: " + NetUtils.getLocalHost() + ", service: " + url.getServiceKey());
                return result;
            }
            for (Invoker invoker : invokers) {
                // 否则依次匹配每个候选 invokers, 符合条件的才返回
                // 具体匹配实现如下:
                if (matchThen(invoker.getUrl(), url)) {
                    result.add(invoker);
                }
            }
            if (!result.isEmpty()) {
                return result;
            } else if (force) {
                logger.warn("The route result is empty and force execute. consumer: " + NetUtils.getLocalHost() + ", service: " + url.getServiceKey() + ", router: " + url.getParameterAndDecoded(RULE_KEY));
                return result;
            }
        } catch (Throwable t) {
            logger.error("Failed to execute condition router rule: " + getUrl() + ", invokers: " + invokers + ", cause: " + t.getMessage(), t);
        }
        return invokers;
    }
    // 路由源地址检测,检查要调用的服务地址是否命中了条件路由的规则
    boolean matchWhen(URL url, Invocation invocation) {
        // whenCondition 为空,代表拦截所有路径
        return CollectionUtils.isEmptyMap(whenCondition) || matchCondition(whenCondition, url, null, invocation);
    }
    // 路由目的地址匹配检测,与路由源地址匹配模式相同,仅将 whenCondition 换为 thenCondition
    private boolean matchThen(URL url, URL param) {
        return CollectionUtils.isNotEmptyMap(thenCondition) && matchCondition(thenCondition, url, param, null);
    }
    
    private boolean matchCondition(Map condition, URL url, URL param, Invocation invocation) {
        Map sample = url.toMap();
        boolean result = false;
        for (Map.Entry matchPair : condition.entrySet()) {
            String key = matchPair.getKey();
            String sampleValue;
            //get real invoked method name from invocation
            if (invocation != null && (METHOD_KEY.equals(key) || METHODS_KEY.equals(key))) {
                sampleValue = invocation.getMethodName();
            } else if (ADDRESS_KEY.equals(key)) {
                sampleValue = url.getAddress();
            } else if (HOST_KEY.equals(key)) {
                sampleValue = url.getHost();
            } else {
                sampleValue = sample.get(key);
                // 为什么要获取两次 sample.get(key); ?
                if (sampleValue == null) {
                    sampleValue = sample.get(key);
                }
            }
            if (sampleValue != null) {
                // 依次调用 MatchPair.isMatch() 方法,进行验证
                // 只要有一次验证不通过,则当前 invocation 即不符合路由条件了
                if (!matchPair.getValue().isMatch(sampleValue, param)) {
                    return false;
                } else {
                    result = true;
                }
            } else {
                //not pass the condition
                if (!matchPair.getValue().matches.isEmpty()) {
                    return false;
                } else {
                    result = true;
                }
            }
        }
        return result;
    }
        // 在 MatchPair 中实现具体的判定是否当前地址是否匹配路由信息
        private boolean isMatch(String value, URL param) {
            // 只有相等匹配情况,直接取 matches 进行校验即可
            if (!matches.isEmpty() && mismatches.isEmpty()) {
                for (String match : matches) {
                    // 简单正则匹配检测, 主要处理 * 规则
                    if (UrlUtils.isMatchGlobPattern(match, value, param)) {
                        return true;
                    }
                }
                return false;
            }
            // 只有不相等匹配情况, 直接取出 mismatches 校验,反向输出即可
            if (!mismatches.isEmpty() && matches.isEmpty()) {
                for (String mismatch : mismatches) {
                    if (UrlUtils.isMatchGlobPattern(mismatch, value, param)) {
                        return false;
                    }
                }
                return true;
            }
            // 相等和不相等两种条件都存在时,优先使用 mismatches 进行配置,然后使用 matches 匹配,即 mismatches 优先级高于 matches
            if (!matches.isEmpty() && !mismatches.isEmpty()) {
                //when both mismatches and matches contain the same value, then using mismatches first
                for (String mismatch : mismatches) {
                    if (UrlUtils.isMatchGlobPattern(mismatch, value, param)) {
                        return false;
                    }
                }
                for (String match : matches) {
                    if (UrlUtils.isMatchGlobPattern(match, value, param)) {
                        return true;
                    }
                }
                return false;
            }
            return false;
        }
    }

2.3. 脚本路由的实现 ScriptRouter

构造方法中主要解析一些必要参数,以及根据类型获取操作系统的脚本解析引擎,非常重要。

    public ScriptRouter(URL url) {
        this.url = url;
        this.priority = url.getParameter(PRIORITY_KEY, SCRIPT_ROUTER_DEFAULT_PRIORITY);
        // 获取解析引擎,根据 type=javascript 等返回
        engine = getEngine(url);
        // 获取 rule=xxxx, 规则
        rule = getRule(url);
        try {
            // 有 GroovyScriptEngineImpl, NashornScriptEngine
            Compilable compilable = (Compilable) engine;
            function = compilable.compile(rule);
        } catch (ScriptException e) {
            logger.error("route error, rule has been ignored. rule: " + rule +
                    ", url: " + RpcContext.getContext().getUrl(), e);
        }
    }

而实际路由的方法,也是直接调用脚本引擎进行脚本解析而得:

    // org.apache.dubbo.rpc.cluster.router.script.ScriptRouter#route
    @Override
    public  List<Invoker> route(List<Invoker> invokers, URL url, Invocation invocation) throws RpcException {
        try {
            // 将参数信息封装为 Bindings, 统一传入脚本引擎
            Bindings bindings = createBindings(invokers, invocation);
            if (function == null) {
                return invokers;
            }
            // 调用脚本引擎的 function.eval() 方法,即将参数传入规则脚本中,得到invokers
            // 并通过 getRoutedInvokers 将结果转换成 List<Invoker> 类型返回
            return getRoutedInvokers(function.eval(bindings));
        } catch (ScriptException e) {
            logger.error("route error, rule has been ignored. rule: " + rule + ", method:" +
                    invocation.getMethodName() + ", url: " + RpcContext.getContext().getUrl(), e);
            return invokers;
        }
    }
    /**
     * create bindings for script engine
     */
    private  Bindings createBindings(List<Invoker> invokers, Invocation invocation) {
        Bindings bindings = engine.createBindings();
        // create a new List of invokers
        bindings.put("invokers", new ArrayList(invokers));
        bindings.put("invocation", invocation);
        bindings.put("context", RpcContext.getContext());
        return bindings;
    }

上面的实现看起来还是有点抽象。我们拿出一个dubbo中的单测试样例,看一下脚本路由的使用方式:

    
    @Test
    public void testRoutePickInvokers() {
        // rule 写法,即是 javascript 的语法,不过它需要调用一些java的方法,以便识别java中传递过来的参数以及返回结果的对接
        // 该js代码脱离了java引擎应该是不可被解析的
        String rule = "var result = new java.util.ArrayList(invokers.size());" +
                "for (i=0;i<invokers.size(); i++){ " +
                // 获取 isAvailable() 属性进行判断是否可将该invoker列入候选列表
                "if (invokers.get(i).isAvailable()) {" +
                "result.add(invokers.get(i)) ;" +
                "}" +
                "} ; " +
                "return result;";
        // 定义一个 route函数,并立即调用它,从而达到返回脚本结果的效果
        String script = "function route(invokers,invocation,context){" + rule + "} route(invokers,invocation,context)";
        Router router = new ScriptRouterFactory().getRouter(getRouteUrl(script));

        List<Invoker> invokers = new ArrayList<Invoker>();
        // 模型invoker 不可用
        Invoker invoker1 = new MockInvoker(false);
        Invoker invoker2 = new MockInvoker(true);
        Invoker invoker3 = new MockInvoker(true);
        invokers.add(invoker1);
        invokers.add(invoker2);
        invokers.add(invoker3);
        List<Invoker> filteredInvokers = router.route(invokers, invokers.get(0).getUrl(), new RpcInvocation());
        Assertions.assertEquals(2, filteredInvokers.size());
        Assertions.assertEquals(invoker2, filteredInvokers.get(0));
        Assertions.assertEquals(invoker3, filteredInvokers.get(1));
    }

所以,其实脚本路由可以写得非常灵活多变,但是维护成本有点高,它不像条件路由那样简洁明了。需要进行反复自测试后才可配置在正式环境中。

2.4. 标签路由 TagRouter

大概就是根据tag=xxx 选择相应的路由地址。该router还未正式发布,不过可以看一下其大概实现:

    @Override
    public  List<Invoker> route(List<Invoker> invokers, URL url, Invocation invocation) throws RpcException {
        if (CollectionUtils.isEmpty(invokers)) {
            return invokers;
        }

        // since the rule can be changed by config center, we should copy one to use.
        final TagRouterRule tagRouterRuleCopy = tagRouterRule;
        if (tagRouterRuleCopy == null || !tagRouterRuleCopy.isValid() || !tagRouterRuleCopy.isEnabled()) {
            return filterUsingStaticTag(invokers, url, invocation);
        }

        List<Invoker> result = invokers;
        // 从url中取出 dubbo.tag=xxx 值 
        String tag = StringUtils.isEmpty(invocation.getAttachment(TAG_KEY)) ? url.getParameter(TAG_KEY) :
                invocation.getAttachment(TAG_KEY);

        // if we are requesting for a Provider with a specific tag
        if (StringUtils.isNotEmpty(tag)) {
            List addresses = tagRouterRuleCopy.getTagnameToAddresses().get(tag);
            // filter by dynamic tag group first
            if (CollectionUtils.isNotEmpty(addresses)) {
                result = filterInvoker(invokers, invoker -> addressMatches(invoker.getUrl(), addresses));
                // if result is not null OR it's null but force=true, return result directly
                if (CollectionUtils.isNotEmpty(result) || tagRouterRuleCopy.isForce()) {
                    return result;
                }
            } else {
                // dynamic tag group doesn't have any item about the requested app OR it's null after filtered by
                // dynamic tag group but force=false. check static tag
                result = filterInvoker(invokers, invoker -> tag.equals(invoker.getUrl().getParameter(TAG_KEY)));
            }
            // If there's no tagged providers that can match the current tagged request. force.tag is set by default
            // to false, which means it will invoke any providers without a tag unless it's explicitly disallowed.
            if (CollectionUtils.isNotEmpty(result) || isForceUseTag(invocation)) {
                return result;
            }
            // FAILOVER: return all Providers without any tags.
            else {
                List<Invoker> tmp = filterInvoker(invokers, invoker -> addressNotMatches(invoker.getUrl(),
                        tagRouterRuleCopy.getAddresses()));
                return filterInvoker(tmp, invoker -> StringUtils.isEmpty(invoker.getUrl().getParameter(TAG_KEY)));
            }
        } else {
            // List addresses = tagRouterRule.filter(providerApp);
            // return all addresses in dynamic tag group.
            List addresses = tagRouterRuleCopy.getAddresses();
            if (CollectionUtils.isNotEmpty(addresses)) {
                result = filterInvoker(invokers, invoker -> addressNotMatches(invoker.getUrl(), addresses));
                // 1. all addresses are in dynamic tag group, return empty list.
                if (CollectionUtils.isEmpty(result)) {
                    return result;
                }
                // 2. if there are some addresses that are not in any dynamic tag group, continue to filter using the
                // static tag group.
            }
            return filterInvoker(result, invoker -> {
                String localTag = invoker.getUrl().getParameter(TAG_KEY);
                return StringUtils.isEmpty(localTag) || !tagRouterRuleCopy.getTagNames().contains(localTag);
            });
        }
    }

其配置格式大致如下:

        String serviceStr = "---\n" +
                "force: false\n" +
                "runtime: true\n" +
                "enabled: false\n" +
                "priority: 1\n" +
                "key: demo-provider\n" +
                "tags:\n" +
                "  - name: tag1\n" +
                "    addresses: [\"30.5.120.37:20881\"]\n" +
                "  - name: tag2\n" +
                "    addresses: [\"30.5.120.37:20880\"]\n" +
                "...";

2.5. AppRouter + ServiceRouter

这两个路由服务实际上不是独立的路由实现类,它是包装了 ConditionRouter 的实现,来完成特殊的业务逻辑。

    // org.apache.dubbo.rpc.cluster.router.condition.config.AppRouter#AppRouter
    public AppRouter(URL url) {
        // 将 application=xxx   作为路由key
        super(url, url.getParameter(CommonConstants.APPLICATION_KEY));
        this.priority = APP_ROUTER_DEFAULT_PRIORITY;
    }
    // org.apache.dubbo.rpc.cluster.router.condition.config.ListenableRouter#ListenableRouter
    public ListenableRouter(URL url, String ruleKey) {
        super(url);
        this.force = false;
        // 初始化路由服务
        this.init(ruleKey);
    }
    private synchronized void init(String ruleKey) {
        if (StringUtils.isEmpty(ruleKey)) {
            return;
        }
        // +   .condition-router
        String routerKey = ruleKey + RULE_SUFFIX;
        ruleRepository.addListener(routerKey, this);
        String rule = ruleRepository.getRule(routerKey, DynamicConfiguration.DEFAULT_GROUP);
        if (StringUtils.isNotEmpty(rule)) {
            this.process(new ConfigChangedEvent(routerKey, DynamicConfiguration.DEFAULT_GROUP, rule));
        }
    }
    
    @Override
    public synchronized void process(ConfigChangedEvent event) {
        if (logger.isInfoEnabled()) {
            logger.info("Notification of condition rule, change type is: " + event.getChangeType() +
                    ", raw rule is:\n " + event.getContent());
        }
        if (event.getChangeType().equals(ConfigChangeType.DELETED)) {
            routerRule = null;
            conditionRouters = Collections.emptyList();
        } else {
            try {
                routerRule = ConditionRuleParser.parse(event.getContent());
                generateConditions(routerRule);
            } catch (Exception e) {
                logger.error("Failed to parse the raw condition rule and it will not take effect, please check " +
                        "if the condition rule matches with the template, the raw rule is:\n " + event.getContent(), e);
            }
        }
    }
    // 进行路由服务调用时,仅把功能委托给 conditionRouters 即可
    @Override
    public  List<Invoker> route(List<Invoker> invokers, URL url, Invocation invocation) throws RpcException {
        if (CollectionUtils.isEmpty(invokers) || conditionRouters.size() == 0) {
            return invokers;
        }

        // We will check enabled status inside each router.
        for (Router router : conditionRouters) {
            invokers = router.route(invokers, url, invocation);
        }

        return invokers;
    }

ServiceRouter 的实现也大致一样,只是取的 routerKey 不同而已。

    // org.apache.dubbo.rpc.cluster.router.condition.config.ServiceRouter#ServiceRouter
    public ServiceRouter(URL url) {
        // 与 AppRouter 的差别在于 routerKey 取值不同
        super(url, DynamicConfiguration.getRuleKey(url));
        this.priority = SERVICE_ROUTER_DEFAULT_PRIORITY;
    }
    // org.apache.dubbo.common.config.configcenter.DynamicConfiguration#getRuleKey
    /**
     * The format is '{interfaceName}:[version]:[group]'
     *
     * @return
     */
    static String getRuleKey(URL url) {
        return url.getColonSeparatedKey();
    }
    // org.apache.dubbo.common.URL#getColonSeparatedKey
    /**
     * The format is "{interface}:[version]:[group]"
     *
     * @return
     */
    public String getColonSeparatedKey() {
        StringBuilder serviceNameBuilder = new StringBuilder();
        serviceNameBuilder.append(this.getServiceInterface());
        append(serviceNameBuilder, VERSION_KEY, false);
        append(serviceNameBuilder, GROUP_KEY, false);
        return serviceNameBuilder.toString();
    }
    

服务路由的出发点,是为了让用户能够更灵活地配置一些特殊的调用场景,如跨机房调用,或者应用一些异常情况比如某实例不希望再被调用。总之,应用场景总是有的,否则就是在玩自嗨。
了解其运行原理,让我们更清楚,我们到底在路由什么!