Linux系统分区为LVM格式的挂载方法

今天上了个Oracle存储数据备份还原挂载存储新硬盘，装完系统后让机房技术把旧硬盘挂上去，我们这边远程操作拷贝数据到新的硬盘上面，在mount /dev/sda2 /mnt的时候，提示“mount: /dev/sda2 already mounted or /mnt busy ” 查证/dev/sda2没有被挂载/mnt也没有在使用

 #fdisk -l /dev/sda
 Disk /dev/sda: 320.0 GB, 320072933376 bytes
 255 heads, 63 sectors/track, 38913 cylinders
 Units = cylinders of 16065 * 512 = 8225280 bytes
 Device Boot Start End Blocks Id System
 /dev/sda1 * 1 13 104391 83 Linux
 /dev/sda2 14 38913 312464250 8e Linux LVM
 是lvm分区，这种不能直接被挂载。
 正确挂载流程：
 #fdisk -lu /dev/sda

Disk /dev/sda: 320.0 GB, 320072933376 bytes
 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
 Units = sectors of 1 * 512 = 512 bytes
 
Device Boot Start End Blocks Id System
 /dev/sda1 * 63 208844 104391 83 Linux
 /dev/sda2 208845 625137344 312464250 8e Linux LVM
 //从上看出lvm分区起始于208845扇区，把这个地址处的分区mount为loop设备：
 #losetup -f -o $[208845*512] /dev/sda2
 #losetup -a
 /dev/loop0: [0011]:1050 (/dev/sda2), offset 106928640
 # lvm pvscan //扫描lvm volumns:
 
PV /dev/sda2 VG VolGroup00 lvm2 [297.97 GB / 0 free]
 Total: 1 [297.97 GB] / in use: 1 [297.97 GB] / in no VG: 0 [0 ]
 # lvm vgchange -ay //激活lvm volumn
 2 logical volume(s) in volume group “VolGroup00” now active
 # ls /dev/mapper/ //查看激活后的分区名称
 control VolGroup00-LogVol00 VolGroup00-LogVol01
 # lvm lvs 查看大小
 LV VG Attr LSize Origin Snap% Move Log Copy% Conv